Cahaba Water Co.
Option · Water resilience

When the water stops, the house keeps running.

Treated municipal water, stored on site and re-pressurized into the home. The same category as a standby generator or a home battery — infrastructure, not doomsday equipment.

Storage
300+gallons
Covers
Main breaks, boil-water
notices, outages
Storage
300 gallons and up
indoor or outdoor
Treatment
Carbon, softening
and monitored UV
Review
Contractor and utility
sign off the fill
Why it exists

Birmingham's water is reliable. Storage covers the interruptions.

The Central Alabama Water (formerly Birmingham Water Works) system runs roughly 4,100 miles of water main across 759 square miles. Mains break. Boil-water notices get issued. Pressure events happen. That is the ordinary arithmetic of infrastructure at that scale, and the utility restores service. Storage is about the hours in between.

A storage system keeps those events in the background. The house draws from a treated reserve, at normal pressure, until service is restored. Your week carries on as planned.

We're deliberate about how this is sold. It belongs in the same conversation as a standby generator or a home battery: a considered piece of home infrastructure that most people never think about until the one week they need it.

How it's arranged

Supply, storage, treatment, house.

A conceptual sequence, shaped to your home — not a fixed specification. The fill arrangement in particular varies by jurisdiction and is reviewed before anything is installed.

01 · Municipal supply
Your existing service line
02 · Fill arrangement
Approved fill with cross-connection protectionYour municipality and the utility determine the specific backflow arrangement, and we build to what they approve
03 · Potable storage
Opaque potable-rated tank, indoor or outdoorOpaque matters - it keeps light out, which keeps biological growth down
04 · Booster
Variable-speed pressure booster, sized to the home's flow and headRestores normal household pressure from the stored reserve
05 · Carbon
Whole-home carbon filtration, sized to design peak flow
06 · Softening
Where measured hardness warrants it
07 · UV
VIQUA UVMAX PRO with intensity monitoringStandard on any storage build - residual disinfectant fades in storage, and UV covers that gap
08 · Distribution
Normal household plumbing, normal pressure
Cutaway illustration of a home water storage system: a buried potable tank outside, feeding a booster pump and treatment equipment in the basement mechanical room.
Illustration — supply, storage, booster, treatment, house. Tank placement and the fill arrangement vary by property and by jurisdiction. The numbered sequence above is the record, not the drawing.

The fill and backflow arrangement is reviewed and approved by the licensed plumbing contractor and the relevant utility authority before installation. Storing potable water and returning it to a pressurized household system is a cross-connection matter. We raise it on the first call, because it shapes both the design and the permit.

Tank options

Sized to the space you actually have.

ConfigurationNominal capacityNotes
Outdoor, opaque305 gallonsSmaller footprint. Suits a side yard or equipment pad.
Outdoor, opaque500 gallonsThe common choice where space allows.
Indoor / freestanding300 gallonsGarage or basement. Confirm floor loading - water weighs roughly 8.34 lb per gallon.
Indoor / freestanding500 gallonsAround 4,170 lb when full. Structural review required.
Multiple tanks, manifolded1,000 gallons and upTanks plumbed together as one reserve. No fixed ceiling - if you have the room, we can size to it.
Three isometric illustrations showing tank placement options: buried below grade, outdoors against a fence on a pad, and indoors freestanding in a garage.
Illustration — the placements in the table above: below grade, outdoors on a pad, and indoors freestanding. Which one suits a property depends on space, delivery access, freeze exposure and floor loading.

There is no fixed ceiling on capacity. Tanks manifold together, so the limit is your site rather than our product line - available space, access for delivery, freeze exposure, floor loading, and the fill arrangement your municipality and utility approve. Tell us the room you have and we will size to it.

How long would it last

Depends entirely on what you use.

Duration follows your household's emergency consumption, so the useful figure is the one you work out for yourself. Set your own assumptions and see.

Storage duration estimator
Stored gallons ÷ daily use = approximate days

For reference: normal US household use runs 60-100 gallons per person per day. Restricted emergency use - drinking, cooking, basic sanitation, minimal laundry - is commonly planned nearer 10-25 gallons per person per day. Your real figure depends on your household and how you'd actually behave.

10 approximate days
This is an estimate only. It assumes a sound tank, steady consumption and no refill. Actual duration varies with household behavior, season and how strictly use is restricted, which is why the figure here comes from your own inputs rather than from a headline number.
Rainwater

Rain is free. What you do with it decides how hard it is.

Two very different projects wear the same name.

In Alabama, collecting rainwater on your own property is treated as a property right. The state leaves the decision to you, and for most uses it stays between you and your roofline.

Where it stays easy: outdoor and non-potable use. Irrigation, washing down, topping up a pond. A roof, a gutter, a tank and a pump. It stays clear of the water you drink, so it stays clear of your plumbing permit.

Where it becomes a project: drinking it. Rainwater you intend to drink has to meet water quality requirements. It has to be filtered and disinfected. And it has to comply with the Alabama Plumbing Code. A permit may be required, depending on the size and how it is plumbed. It also has to stay completely separate from the utility supply. That is the same cross-connection question that governs any storage system.

That second version is a permitted, engineered project rather than a product you buy. We will tell you which one you are describing on the first call.

Rainwater, honestly

Non-potable collection is straightforward and we can help you plan it

Potable rainwater is possible, and it is a permitted project with real requirements

We will not plumb rainwater into your drinking water without the permits and the treatment that go with it

We do not claim rainwater is cleaner than what Central Alabama Water delivers. It is not

Professional confirmation required. Potable rainwater use involves the Alabama Plumbing Code, your municipality and your water utility's cross-connection control rules. Those are settled before anything is installed, not after.

The rest of the house

Stored water needs pressure, and pressure needs power.

Water and power fail together more often than separately.

This matters most where there is no municipal pressure to fall back on at all. On a private well the pump stops the moment the power does, which is why storage shows up in nearly every lake house and remote property build we do and only sometimes in town.

The same storms take out both. A tank of water still needs a pump, and a pump needs power. If you already have standby power, sizing the water equipment to run on it is a short conversation. If standby power is still on the list, that is worth sorting out first.

Generators are your electrician's side of the job. What we provide is the load the water equipment draws, so the two systems get specified against each other.

Think of it the way you think about a standby generator: quiet infrastructure that earns its place the first week the main goes down.

A large opaque potable water storage tank beside a stainless multistage booster pump and pressure vessel.
Pressure A booster is what turns a tank of standing water back into normal household pressure. Representative equipment — the booster is sized to your home's flow and head, not selected from a picture.
Questions

Questions we get about this.

Is it legal to collect rainwater in Alabama?
Yes. Alabama treats rainwater collection on your own property as a property right, and there is no state regulation preventing it. Using it outdoors for irrigation is straightforward. Drinking it is a permitted, engineered project, with water quality requirements, filtration and disinfection, Alabama Plumbing Code compliance and possibly a permit.
Can you plumb rainwater into my house for drinking?
Only as a permitted, engineered project, and only with the treatment and separation that go with it. Rainwater intended for potable use has to be kept completely apart from the utility supply, which is the same cross-connection question that governs any storage system. Your municipality and water utility both have a say, and we settle that before anything is installed.
Is stored water safer than what comes out of the tap?
No, and we will not say it is. Central Alabama Water meets every federal and state drinking water standard. Storage is about availability: water at normal household pressure when the main is broken or a boil-water notice is in effect.
Do I need a generator for this to work?
You need some way to move the water. A tank still needs a pump, and a pump needs power. If you already have standby power, we size the water equipment to run on it. If standby power is still on the list, sort that out first, because stored water you cannot pressurize is not much use.
How much water do I actually need?
It depends entirely on what you use, which is why the estimator on this page works from your household's gallons per day instead of a generic chart. The honest answer for most homes is less than people expect once you separate drinking and cooking from laundry and irrigation.

Start with an assessment

Storage sits on top of a properly sized treatment system. We size whole-home systems from actual water demand, then match the tank to your water, your flow and your space.

Request an assessment
Water resilienceQuoted after assessment
Get a quote