Three towns in Jefferson County drink groundwater
Irondale, Leeds and Trussville are the county's only groundwater systems. Their disinfection byproducts run at a fraction of the surface-water systems — and the same rock is why their water is hard.
Everything here is sourced. Where the honest answer costs us a sale, we write that down too — the softener article is the clearest example. Every claim carries its citation at the foot of the piece, so you can check any of it against the original.
Irondale, Leeds and Trussville are the county's only groundwater systems. Their disinfection byproducts run at a fraction of the surface-water systems — and the same rock is why their water is hard.
The requirement is real. It is also a document your organization writes and owns — not a product, and not something anyone can sell you.
You have been pitched a softener. Central Alabama Water publishes 2.2 to 13.1 grains per gallon, so the reading at your address decides this one.
Two of the five common causes are service calls, not filtration. Here is how to tell which one you have before you spend anything.
Carbonated water backing into copper pipe makes carbonic acid, and carbonic acid dissolves copper into the next drink you pour.
Not a water quality problem. An operations problem that arrives with no warning and bills you mostly in places you did not model.
A dermatology practice's break room and a dialysis loop are not the same problem, and are not governed by the same anything.
Most people who buy a tank are not preparing for collapse. They went through one bad week and decided not to do it again.
There are three legitimate answers and they differ by a factor of nearly a hundred. Which one somebody quotes tells you what they are selling.
People buy a generator one year and think about water another year. Then the event arrives and it turns out they were always the same plan.
Collecting it is straightforward. Plumbing it into your house or drinking it moves the question out of property law entirely.
It sounds like a sales line. It is actually a measured finding, published in Environmental Health Perspectives — and the number is larger than most people expect.
Point-of-use and point-of-entry are not competing products. They solve different problems, and confusing them is the most common and most expensive mistake in this category.
Birmingham uses free chlorine rather than chloramine. That single fact determines which filter media is correct, and it's the reason some companies will try to sell you a more expensive one than you need.
It wasn't contamination, and it wasn't your imagination. It was a compound called geosmin, and it will happen again.
It depends on your tap, not on the metro. Central Alabama Water publishes 2.2 to 13.1 grains per gallon — here is what that spread means for your house.
How it works, what it genuinely removes, what it doesn't, and the questions that separate a well-specified system from a marked-up one.
They're detectable. They're below the federal limit. Both of those facts matter, and most of what you'll read online gets one of them wrong.
On compliant municipal water, UV is an additional barrier rather than a fix. There is one situation where it becomes genuinely important, and it isn't the one you'll be sold.
It's the most common complaint in residential water treatment, and it's almost always the same mistake. It is also entirely avoidable — before you buy, not after.
Central Alabama Water (formerly Birmingham Water Works) runs roughly 4,100 miles of main. Mains break. Here is what a home water outage actually looks like, and what it takes to not care.
Every utility publishes one and almost nobody opens it. It takes fifteen minutes to learn, and it makes you immune to about ninety percent of water treatment sales pitches.
The free water test, the in-home presentation, the price that drops if you decide tonight. Here is the machinery behind it, and why we built this company the other way round.
Most of these articles come back to the same thing: measure before you buy. Central Alabama Water publishes hardness from 2.2 to 13.1 grains per gallon, so your own reading is the number that settles it. The assessment takes a few minutes and the hardness test is free.